Attach a description of the problem:
-Automatic update FAN control
-Mounting of the difficulties which will not start in the operating system CD when onboard VGA is disabled
-Installation of the difficulties in not access the RAID AHCI option ROM when using the VGA card PCI add-on
High-speed management of the fan to fan header J12
-Mounting the USB FDD difficulties that will not work if you disable the integrated VGA
-Mounting of the difficulties that the system is suspended in the recruitment office when LSI 8208ELP card
Updated USB-LAN configuration to solve the problem of load option ROM
S5397_v105 v 5.1 05/02/2009
Attach a description of the problem:
-Installation of the difficulties that the BIOS still added to the BMC BIOS SDR
-Installation of memory difficulties DMI table data is not correct
Assembly problem does not start when choosing the location of the ROM "E000 by xxx" is selected
-Installation of the difficulties in the M3296 SMBus can not navigate to continue S3
-Mounting of the difficulties if Snoop filter is set to [On], the memory bandwidth of producing defective
-Added support for NVIDIA Tesla devices
-Setting the standard S1 ACPI suspend such
S5397_v104 09/18/2008. zip v 4.1
Attach a description of the problem:
-Update CPU Micro Code
-Updated support for DVD SATA boot devices
-Update support for FB-DIMM voltage to allow automatic detection between. V 5v
-Installation of the difficulties that the data would be an error if the PECI is used with IPMI
-Added BIOS option "Snoop Filter" to help some video performance problems
-Added setting management IPMI Fan
Mounting difficulties, where you can not get the system POST video card is inserted into the 9800X2
Assembly and a problem where you can not get the system to POST with 128 GB of memory is inserted into the
Mounting difficulties, does not alter the Stratix II card detected in slot PCIe
-Added support for SATA hot plug
S5397_v103 05/28/2008. v. zip 1.3
Attach a description of the problem:
To change the default power management settings for C1E / [Off]
-Updated ROM v 1.2.42 PXE options
-Installation of the difficulties the integrated VGA mode will not work properly PXE
-Mounting of the difficulties that changes do not work properly buttons when it comes to enter the option ROM
-Updated functionality PECI temperature indicated
-Added "Default First Video Adapter" Grains BIOS setup
11/03/2008 v1.02 S5397_v102
New features and enhancements:
* Added option to enable / disable the legacy diskette
* Mount of physical problems it poses for mtrr memory over 4 GB or more of eight Dimm
modules are placed in the
* Updated CPU Micro Code
* Set the default setting for SATA mode [Enhanced]
* Added BIOS boot option
* Difficulties mount the system can suspend the full story (C3H) if console redirection and the fan
Report errors in each set to [Enable]
* Mounting difficulties that can not boot DVD-ROM if ESB2 SATA RAID is [Enable]
* Added a BIOS setting to [Enable / Disable] onboard LSI 1068E SAS
* Added a BIOS setting to [Enable / Disable] legacy floppy controller
* Install a discrete mtrr failure to perform when more than eight DIMM is inserted into the direct
* Difficulties mount the system can be restored when the continuation of ACPI S3 standby
* Items that are added to support the selection of the option ROM scan
* Resources IRQ conflict mounted after installing the video card is PCIe nVidia Quadro NVS400
* Added the item to [Enable / Disable] nVidia binary VGA Windows XP
* Difficulties mount the installation of the operating system to be very slow, as a result of a lot of
memory is inserted into the
* Install the IPMI address in the pool when the card is incorrectly placed in the SMDC M3295
* Installation of the difficulties DMI event log is not done when there is a CMOS checksum error
Difficultyassembly in which you want to press the "ESC" twice to exit the BIOS setup menu
S5397_v101 v 1.1 03/01/2008
New features and enhancements:
* CPU temperature shows a change in the way of PECI
* SAS RAID ROM is enabled by default
* The speed of the fan speed is in the most complete set
* Updated CPU support
